EAN 850 A - 8,5mm (1/3") advanced day / night network camera, high resolution, automatic IR cut filter

Features

  • 4 independently adjustable network video streams (for compression method and resolution)
  • compression methods: H.264, MPEG4 or MJPEG
  • adjustable compression rate with 4 levels
  • day/night function with automatically swiveling IR cut filter
  • camera module with high resolution technology (540 TV lines)
  • high resolution stream: up to 704 x 576 pixel
  • 4 adjustable privacy zones
  • bidirectional audio
  • composite video output
  • local alarm input / output
  • motion detection with 5 zones
  • alarm e-mail and network alarm function
  • local alarm video storage at optional SD card
  • PoE (Power over Ethernet) supported
  • network bandwidth control
  • power supply included
 
Technical data
Pickup device 8,5mm (1/3") SONY super HAD interlaced CCD, Polestar solution
Effective pixels 752 (H) x 582 (V) PAL
Sensitivity 0,002 lux (sens-up x128), 0,25 lux / F = 1.2
Lens optional C/CS mount, manual / DD lens control supported (lens not included)
Day/night control automatically swiveling IR cut filter and enhanced b/w sensitivity
Video output BNC socket, composite 1 Vp-p / 75 Ohm
Video output resolution 540 TV lines
Video compression H.264 / MPEG-4 / M-JPEG
Video resolution D1, VGA, CIF, QCIF
704 x 576, 640 x 480, 352 x 288, 176 x 144
Compression setting 5 levels adjustable (superior / high / standard / low / lowest)
Streaming frame rate 1 ~ 25 IPS, adjustable
Microphone internal electret microphone, seelection internal microphone or audio input in camera setting
Audio input 3,5mm stereo socket, sensitivity 100 mV max. / 10 KOhm impedance, selection internal microphone or audio input in camera setting
Audio output 3,5mm stereo socket, sensitivity 500 mV max. at 10 KOhm impedance
Compression method ADPCM (pulse code modulation) U-Law
Frequency bandwidth 300 Hz ~ 3,4 KHz
Operation modes duplex operation, audio direction enabled in browser GUI, selection internal microphone or audio input in camera setting
Alarm input 1x input for dry contacts, N.O. / N.C. adjustable
Alarm output 1x dry relay contact, N.O. / N.C. adjustable, 70 V DC / 200 mA max.
Network interface 10 Base-T / 100 Base-TX auto negotiation, RJ-45 socket
Protocol types HTTP, TCP/IP, UPD/IP, FTP, SMTP, RTP, RTCP, DHCP, DNS, DDNS, NTP
Bandwidth control min. 64 kbit / sec. adjustable
RS-485 RS-485 interface half-duplex (function reserved), screwless terminal 2-pin
Green network LED on: 100 Mbps / off: 10 Mbps
Yellow network LED on (still): linked / on (blinking): active / off: not linked
Red power LED on: system power on / off: system power off
Pre-alarm memory internal memory for pre-alarm record 2 ~ 5 sec.
Event log internal event log for 256 entries (FIFO), non-volatile
Local storage SD card interface for optional SD card 3.3 V, supports SDHC host specification
Power supply 12 V DC (230 V AC via included power supply) or PoE (PoE 802.3af 48 VDC)
Power consumption 7 W max. (12 V DC)
Ambient temperature 0°C ~ +50°C
Dimensions (WxHxD) 68 x 57 x 135 mm
Weight 600 g
 
Product documentation